www.importecwarehouse.com

Quality Brand GKN Loebro 126 chassis Mercedes Benz Annular Axle Shaft.

PLEASE NOTE: This is an annular axle shaft and not a homokinetic shaft. Annular refers to an inner (differential side) C.V. joint that is without an input shaft, versus the homokinetic shaft which has an input shaft and is splined on both ends. The annular version was fitted to later models and the only way to know this for sure is to physically check and make sure it matches as per the image.

If you are converting from an earlier model homokinetic axle shaft, additional parts are required - Please check with you local M-B dealer - the parts are: (1x) - 126 350 01 45 Flange, (2x) 126 357 09 75 Lock Plate, (x6) 001 990 10 12 Bolts

Fits the following Mercedes models with an existing annular axle shaft: 

• 300SD 1978-80 *with existing annular axle.
• 380SE 1984-1985 *with existing annular axle.
• 380SEL 1981-1983 *with existing annular axle.
• 420SEL 1986-1991 *with existing annular axle.
• 450SEL 6.9 1975-1979 *with existing annular axle.
• 500SEL 1984-1985 *with existing annular axle.
• 560SEC 1986-1991 *with existing annular axle.
• 560SEL 1986-1991 *with existing annular axle.

*For vehicles with homokinteic axles, additional parts are required as above, please check with you local MB dealer for price and availability.